Posts tagged ‘electric’

Stabmixer – Electric Outboard Project

Ever since I was a kid, i wanted an electric outboard motor to use with a light rubber boat (without a hard floor). I actually even started experimenting when i was 12, but that didn’t work out at all.

Now, many years later, I wanted to give it a try again, my goal was a lightweight electric outboard, driving a chain inside a tube down to the propeller. Unfortunately, it all went wrong after I’ve made a prototype that was running the chain directly through the water. It worked so well, that I’ve decided to keep the chain outside. What I built is good for more than 1kw, but my intex excursion has it’s limits at around 6kph, which requires roughly 400watts.

The part’s I’ve used are:

Battery: 12s4p 18650 High drain (powertool) cells.
Motor: Chinese no-name Hub, good for about 1000w continues
Gear Ratio: 22×14
Propeller: JXF 15×13 / 381 x 330mm
Other Parts: Aluminium Rods, Steel Plates, Road frame parts, Buttom Bracket, Bolts, Nuts, Washers, Stem, Handlebar.

Be sure to check out the videos: